This Automotive Floor Panel Stamping Part is a formed sheet metal component designed for automotive body and floor structure applications.
The part is manufactured from 1.2 mm CR3 low strength steel and features a large three-dimensional profile with multiple formed sections. Its structure includes elongated openings, raised ribs, deep formed areas, side flanges, and localized contours, creating a combination of structural and functional features within a single sheet metal component.
The large formed surfaces provide the main floor structure, while the raised ribs and recessed sections add rigidity to the panel. The elongated openings and localized features are integrated into the part geometry for specific vehicle body and assembly requirements.
With a relatively large surface area and complex formed profile, the component requires controlled deformation during stamping. The 1.2 mm CR3 steel provides the formability needed to produce the various contours, transitions, and flanges while maintaining the overall shape of the floor panel.
The part is produced through multiple stamping operations, including forming, trimming, piercing, secondary forming, and flanging. These operations progressively create the final geometry, allowing the large panel to be shaped while maintaining the required openings, edges, and formed features.
Product Characteristics
- Material: CR3 low strength steel
- Thickness: 1.2 mm
- Part Type: Automotive floor panel
- Structure: Large three-dimensional sheet metal profile
- Features: Formed areas, ribs, openings, flanges, and contours
- Process: Forming, trimming, piercing, and flanging
- Application: Automotive body and floor structure
The combination of large formed surfaces, reinforcement ribs, elongated openings, and flanged edges gives this automotive floor panel its characteristic structural configuration. It is a representative example of a large-format automotive stamped component where material formability and geometric accuracy are important to the finished part.
